Aspire One BIOS Recovеry
19.09.2009
Нетбука се държи така сякаш му е изгоряло видеото - черен екран и на неговия си монитор и на външен, ако се стите да закачите такъв. Не свети нито един индикатор освен този на захранването. След малко четене в нета се оказва, че на тези модели по непонятни причини на 6-я месец от ползването им се омазва жестоко BIOS-a. Не ме питайте защо.
За възстановяване/обновяване на BIOS-а:
1. USB stick – форматиран на FAT
2. Последна или поне текущата версия на BIOS – за конкретния модел
Аз (AA1 ZG5) ги свалих от тук
(На 22.04.2014 имаме същия проблем. Файловете за BIOS-a ги свалих от тук)
Слагаме FLASHIT.EXE, 3309.bat и BIOS файла в root директорията на флашката. Копираме BIOS файла zg*.fd като ZG5IA32.FD
Изключваме АА1, и батерията и адаптера да са свързани с компютъра.
Натискаме тайния клавиш Fn+Esc, задържаме и натискаме Power бутона. След малко пускаме Fn+Esc клавишите и зеленият индикатор на Power бутони трябва да започне да мига. Демек стартирало се е флашването на BIOS. Тук стискаме палци и си кръстосваме краката. Не прекъсваме процеса(!!!), след известно време Power бутона ще спре да мига и АА1 ще стартира/ reboot. При мен отне 30 секунди слава богу и ооо чудо нещото тръгна.
Айде честито!
събота, 19 септември 2009 г.
петък, 4 септември 2009 г.
петък, 17 юли 2009 г.
четвъртък, 2 юли 2009 г.
How can I prevent users from connecting to a USB storage device?
http://support.microsoft.com/kb/823732
If a USB storage device is not already installed on the computer
If a USB storage device is not already installed on the computer, assign the user or the group Deny permissions to the following files:
%SystemRoot%\Inf\Usbstor.pnf
%SystemRoot%\Inf\Usbstor.inf
When you do this, users cannot install a USB storage device on the computer. To assign a user or group Deny permissions to the Usbstor.pnf and Usbstor.inf files, follow these steps:
Start Windows Explorer, and then locate the %SystemRoot%\Inf folder.
Right-click the Usbstor.pnf file, and then click Properties.
Click the Security tab.
In the Group or user names list, click the user or group that you want to set Deny permissions for.
In the Permissions for UserName or GroupName list, click to select the Deny check box next to Full Control, and then click OK.
Note Also add the System account to the Deny list.
Right-click the Usbstor.inf file, and then click Properties.
Click the Security tab.
In the Group or user names list, click the user or group that you want to set Deny permissions for.
In the Permissions for UserName or GroupName list, click to select the Deny check box next to Full Control, and then click OK.
If a USB storage device is already installed on the computer
If a USB storage device is already installed on the computer, you can change the registry to make sure that the device does not work when the user connects to the computer.
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows:
http://support.microsoft.com/kb/322756
If a USB storage device is already installed on the computer, set the Start value in the following registry key to 4:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\UsbStor
When you do this, the USB storage device does not work when the user connects the device to the computer. To set the Start value, follow these steps:
Click Start, and then click Run.
In the Open box, type regedit, and then click OK.
Locate and then click the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\UsbStor
In the details pane, double-click Start.
In the Value data box, type 4, click Hexadecimal (if it is not already selected), and then click OK.
Exit Registry Editor.
If a USB storage device is not already installed on the computer
If a USB storage device is not already installed on the computer, assign the user or the group Deny permissions to the following files:
%SystemRoot%\Inf\Usbstor.pnf
%SystemRoot%\Inf\Usbstor.inf
When you do this, users cannot install a USB storage device on the computer. To assign a user or group Deny permissions to the Usbstor.pnf and Usbstor.inf files, follow these steps:
Start Windows Explorer, and then locate the %SystemRoot%\Inf folder.
Right-click the Usbstor.pnf file, and then click Properties.
Click the Security tab.
In the Group or user names list, click the user or group that you want to set Deny permissions for.
In the Permissions for UserName or GroupName list, click to select the Deny check box next to Full Control, and then click OK.
Note Also add the System account to the Deny list.
Right-click the Usbstor.inf file, and then click Properties.
Click the Security tab.
In the Group or user names list, click the user or group that you want to set Deny permissions for.
In the Permissions for UserName or GroupName list, click to select the Deny check box next to Full Control, and then click OK.
If a USB storage device is already installed on the computer
If a USB storage device is already installed on the computer, you can change the registry to make sure that the device does not work when the user connects to the computer.
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows:
http://support.microsoft.com/kb/322756
If a USB storage device is already installed on the computer, set the Start value in the following registry key to 4:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\UsbStor
When you do this, the USB storage device does not work when the user connects the device to the computer. To set the Start value, follow these steps:
Click Start, and then click Run.
In the Open box, type regedit, and then click OK.
Locate and then click the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\UsbStor
In the details pane, double-click Start.
In the Value data box, type 4, click Hexadecimal (if it is not already selected), and then click OK.
Exit Registry Editor.
четвъртък, 4 юни 2009 г.
Folder names in outlook
При първоначална настройка на outlook профила всички имена на папки са на немски или някакъв друг език. Тогава за да станат на английски:
1. Затваряме OUTLOOK.EXE
2. През команден ред пускаме: "C:\Program Files\Microsoft Office\OFFICE11\OUTLOOK.EXE" /resetfoldernames
1. Затваряме OUTLOOK.EXE
2. През команден ред пускаме: "C:\Program Files\Microsoft Office\OFFICE11\OUTLOOK.EXE" /resetfoldernames
вторник, 12 май 2009 г.
събота, 10 януари 2009 г.
омазани асоциации в ms office
не е проверено, но изглежда обещаващо.
имам такава ситуация и ще проверя как се държи /regserver, след това ще допълня този пост
================================
Command-Line Switches
The lovely Beth Melton, Microsoft MVP for Microsoft Word, made me realize I need to include these instructions here because...well, because I saw her post it enough! :)
Beth says the /regserver switch will re-register the application, which will recreate all of the application-specific Registry entries and it also recreates the file associations. Since the "Open with" command uses the file associations you'll still encounter errors if the file associations are damaged or corrupt.
Hit Start-->Run and type the command-line switch below into the box and hit Enter (or click OK). Note that there is a space before the slash:
For Word, type: winword /r
For Excel, type: excel /regserver
For PowerPoint, type: powerpnt /regserver
For Access, type: msaccess /regserver
===============================
имам такава ситуация и ще проверя как се държи /regserver, след това ще допълня този пост
================================
Command-Line Switches
The lovely Beth Melton, Microsoft MVP for Microsoft Word, made me realize I need to include these instructions here because...well, because I saw her post it enough! :)
Beth says the /regserver switch will re-register the application, which will recreate all of the application-specific Registry entries and it also recreates the file associations. Since the "Open with" command uses the file associations you'll still encounter errors if the file associations are damaged or corrupt.
Hit Start-->Run and type the command-line switch below into the box and hit Enter (or click OK). Note that there is a space before the slash:
For Word, type: winword /r
For Excel, type: excel /regserver
For PowerPoint, type: powerpnt /regserver
For Access, type: msaccess /regserver
===============================
Абонамент за:
Публикации (Atom)