Close all SAP sessions and SAP Logon Pad
Navigate to C:\users\
Rename folder History to History_yyyymmdd p.e.
Try again
Full instruction - here
понеделник, 6 февруари 2017 г.
SAP GUI History not getting saved
SAP GUI History not getting saved
Close all SAP sessions and SAP Logon Pad
Navigate to C:\users\\AppData\Roaming\SAP\SAP GUI\
Rename folder History to History_yyyymmdd p.e.
Try again
Full instruction - here
Close all SAP sessions and SAP Logon Pad
Navigate to C:\users\
Rename folder History to History_yyyymmdd p.e.
Try again
Full instruction - here
петък, 20 януари 2017 г.
Share a Wired Internet Connection in Windows 8 and make it wi-fi hot-spot
Share a Wired Internet Connection in Windows 8 and make it wi-fi hot-spot
Unfortunately, Windows 8 stripped away the graphical interface for setting up an ad-hoc network, so it’s not quite as easy to set up as it is in Windows 7 or 10. The underlying feature is still present, though. You just have to resort to a little command line trickery.
First, you’ll need to make sure your existing wireless network is shared with other network users. Press Windows+R on your keyboard to open the Run dialog box, type “ncpa.cpl”, and then hit Enter.
In the network connections window, right-click your Wireless network and select “Properties” from the context menu.
Switch over to the “Sharing” tab and enable the “Allow other network users to connect through this computer’s Internet connection” checkbox. Go ahead and clear the “Allow other network users to control or disable the shared Internet connection” checkbox while you’re at it and then click the “OK” button.
Next, you’ll need to launch the Command Prompt with administrative privileges. Right-click in the bottom left of your screen (or hit Windows+X) and then select “Command Prompt (Admin)” on the Power Users menu that appears.
With the command prompt open, your next step is to set up the wireless network using the netsh like so:
netsh wlan set hostednetwork mode=allow ssid="SSID" key="PASSWORD"
Where SSID is the name of your network and PASSWORD is the password you want users to connect with. The access point is created with WPA2-PSK (AES) encryption.
Next, you’ll start broadcasting our network with the following command:
netsh wlan start hostednetwork
And at any time, you can use this last command to show information about the connection. It lists things like the channel your connection uses, ssid name, authentication type, radio type, and the number of clients connected to your network.
netsh wlan show hostednetwork
When you’re done, you should be able to connect any Wi-Fi device to your new ad-hoc network.
The source of this is: here
Unfortunately, Windows 8 stripped away the graphical interface for setting up an ad-hoc network, so it’s not quite as easy to set up as it is in Windows 7 or 10. The underlying feature is still present, though. You just have to resort to a little command line trickery.
First, you’ll need to make sure your existing wireless network is shared with other network users. Press Windows+R on your keyboard to open the Run dialog box, type “ncpa.cpl”, and then hit Enter.
In the network connections window, right-click your Wireless network and select “Properties” from the context menu.
Switch over to the “Sharing” tab and enable the “Allow other network users to connect through this computer’s Internet connection” checkbox. Go ahead and clear the “Allow other network users to control or disable the shared Internet connection” checkbox while you’re at it and then click the “OK” button.
Next, you’ll need to launch the Command Prompt with administrative privileges. Right-click in the bottom left of your screen (or hit Windows+X) and then select “Command Prompt (Admin)” on the Power Users menu that appears.
With the command prompt open, your next step is to set up the wireless network using the netsh like so:
netsh wlan set hostednetwork mode=allow ssid="SSID" key="PASSWORD"
Where SSID is the name of your network and PASSWORD is the password you want users to connect with. The access point is created with WPA2-PSK (AES) encryption.
Next, you’ll start broadcasting our network with the following command:
netsh wlan start hostednetwork
And at any time, you can use this last command to show information about the connection. It lists things like the channel your connection uses, ssid name, authentication type, radio type, and the number of clients connected to your network.
netsh wlan show hostednetwork
When you’re done, you should be able to connect any Wi-Fi device to your new ad-hoc network.
The source of this is: here
сряда, 30 ноември 2016 г.
Отключване на телфон закупен от Мтел за друга мрежа
За да отключите телефона си изпращате SMS на номер 1588 със текст IMEI на телефона.
Ще ви се върне код за отключване.
#pw+ се генерират чрез бутон *
От там ви препращат чрез SMS да се обадите на телефон 088 1881
Там отново диктувате IMEI и си казвате името.
Обратно ви диктуват кода за отключване. В телефона трябва да е пъхната сим карта на мтел - може и да не е активан
Ще ви се върне код за отключване.
#pw+ се генерират чрез бутон *
От там ви препращат чрез SMS да се обадите на телефон 088 1881
Там отново диктувате IMEI и си казвате името.
Обратно ви диктуват кода за отключване. В телефона трябва да е пъхната сим карта на мтел - може и да не е активан
вторник, 29 ноември 2016 г.
Забравена парола excel 2016 / Forgot Password in Excel 2013/2016 Workbook or Worksheet
http://www.isumsoft.com/office/forgot-password-in-excel-2013-2016-workbook-sheet.html#case3
Нека файла се казва File.xlsx и защитената страница в него е sheet3
1. Rename File.xlsx to File.zip
2. Open File.zip with 7-zip
3. Open xl\worksheets\sheet3.xml and delete all tag sheetProtection....
4. Close xml file click safe and update zip file
5. Rename File.zip to File.xlsx
Нека файла се казва File.xlsx и защитената страница в него е sheet3
1. Rename File.xlsx to File.zip
2. Open File.zip with 7-zip
3. Open xl\worksheets\sheet3.xml and delete all tag sheetProtection....
4. Close xml file click safe and update zip file
5. Rename File.zip to File.xlsx
сряда, 14 септември 2016 г.
петък, 29 юли 2016 г.
Keyboard shortcuts Ctrl-C, Ctrl-V, Ctrl-Z, Ctrl-A not working in Word
Да знам приятели.
Инсталирате Office 2016 и изненада в Word най-често използваните бързите клавиши за Copy, Paste, Cut, Select All са ПРОМЕНЕНИ
Наистина не мога да измисля никакво оправдание за МикроМеките.
Защо по дяволите?!!!!?
Какво ви е направил света бе хора????
РЕШЕНИЕ:
To "restore" word to the way you remember, you need to go to, File->Options->Customize Ribbon On the bottom there is a label "Keyboard Shortcuts" and a button "Customize…" – click it
On the Categories box, scroll until you find "All Commands" and select it. Now, from the right box select the following Command: EditCopy Look at the "Current Keys" Box you will see "Ctrl+Insert" which is the NEW mapping now put your cursor in the "Press new shortcut key" and Press Ctrl+C, a button on the bottom named Assign will light up, and you click on it.
Do the same for all the shortcuts you like, such as EditPaste, EditUndo, EditRedo, EditCut, SelectAll etc.
========================
Инсталирате Office 2016 и изненада в Word най-често използваните бързите клавиши за Copy, Paste, Cut, Select All са ПРОМЕНЕНИ
Наистина не мога да измисля никакво оправдание за МикроМеките.
Защо по дяволите?!!!!?
Какво ви е направил света бе хора????
РЕШЕНИЕ:
To "restore" word to the way you remember, you need to go to, File->Options->Customize Ribbon On the bottom there is a label "Keyboard Shortcuts" and a button "Customize…" – click it
On the Categories box, scroll until you find "All Commands" and select it. Now, from the right box select the following Command: EditCopy Look at the "Current Keys" Box you will see "Ctrl+Insert" which is the NEW mapping now put your cursor in the "Press new shortcut key" and Press Ctrl+C, a button on the bottom named Assign will light up, and you click on it.
Do the same for all the shortcuts you like, such as EditPaste, EditUndo, EditRedo, EditCut, SelectAll etc.
========================
четвъртък, 28 юли 2016 г.
How to stop Windows 10 from changing the default printer
Read this.
Или идете на Settings; Devices; Printers&Scaners; Променете опцията "Let Windows manage my default printer" от ON на OFF
Или идете на Settings; Devices; Printers&Scaners; Променете опцията "Let Windows manage my default printer" от ON на OFF
Абонамент за:
Публикации (Atom)